Skip to content

Aeon Shisha Edition 4 Lounge - Clear

by Aeon
Sold out
£239.99

Notify me when back in stock


The new AEON Shisha - Edition 4 is the successor of Edition 3 and has been developed & continuously tested for over a year. The AEON Shishas are produced in Germany under the highest quality standards from V2A stainless steel (1.4305 V2A stainless steel from Switzerland) near Stuttgart and then each component of the AEON Shisha undergoes a strict quality control in our warehouse. The production of the Shishas in Germany is carried out with the certification ISO 9001 and ISO 14001 and every thread is checked on site for accuracy of fit.

  • Head adapter with M16x1 thread
  • Carbon plate (hand ground from V2A stainless steel)
  • 18/8 ground to M16x1 Adapter
  • Smoke column with 29/2 cut at the bottom (M14x1 thread inside for fixing to the base) and 18/8 cut at the top
  • Base with one connection incl. closed chamber and blow-out valve at the smoke column
  • 1 x hose end piece with shortened 18/8 ground joint
  • 4 x sleeves incl. 6mm ball for blowing out
  • Immersion tube with M14x1 thread top and bottom
  • Base with thread

How does Edition 4 - Lounge differ from other shishas?
With the Edition 4 AEON have developed a new blow-out valve which guides the smoke upwards along the smoke column. This system also works if you attach other smoke columns to the Edition 4 (e.g. with the optional "Base-Adapter"). The entire technology of the blow-off valve is elegantly hidden in the base and is hardly visible from the outside. The Base has a 29/2 cut, which means you can customize the Edition 4 to your own taste. For example, other smoke columns with a 29/2 cut fit easily into the Base and you can change the look of your shisha at any time. The smoke column that comes with the Edition 4 is first inserted into the 29/2 cut of the Base and then screwed to the immersion tube with M14x1 thread. Since the smoke column has a 18/8 cut on top, you can also attach a molasse catcher or other components with 18/8 cut and adjust the height of the Edition 4 according to your wishes.

How does the Edition 4 - Lounge differ from the other Edition 4 - variants?
The Edition 4 - Lounge is especially designed for the use in Shishabars. Few components, a simple construction but a modern simple design with a beautiful blow-off valve (as with the other Edition 4 variants) ensure that the Edition 4 - Lounge is a real eye-catcher in every Shisha Lounge. A diffusor has been specially omitted here, as the "bubbling" of the shisha is often heard in shisha bars. A suitable diffusor for the Edition 4 is optionally available and can be attached to the dive tube of the Edition 4 - Lounge without any problems. The smoke column consists of one part and is let into the base by 29/2 grinding and then screwed tightly to the immersion tube, so that the Edition 4 - Lounge could be carried along the entire smoke column. There is a 18/8 cut under the plate, so that the carbon plate can be easily removed, for example for changing the head. Molasse catchers could also be fitted as required. A shorter immersion tube could also be fitted for Edition 4, the immersion tubes of the different versions are compatible with each other.

Dimensions of the Shisha:

  • Height: ca. 53 cm
  • Weight: 4.20 kg

IMPORTANT NOTE: The bowls are hand-blown and may differ in colour and colour gradients. Since all bowls are handmade, it is possible that small air bubbles are present in the glass.